李金城 
編號 | 中文名稱 | 英文名稱 |
CR 13930-2000 | 旋轉動力泵 泵的進口部分設計 泵的安裝建議 | Rotodynamic pumps - Design of pump intakes - Recommendations for installation of pumps |
CR 13931-2000 | 旋轉動力泵 法蘭離心、混流和軸流泵的力和力矩 水平和垂直軸 | Rotodynamic pumps - Forces and moments on flanges centrifugal, mixed flow and axial flow pumps - Horizontal and vertical shafts |
CR 13932-2000 | 旋轉動力泵 管道系統的進口和出口管件建議書 | Rotodynamic pumps - Recommendations for fitting of inlet and outlet on piping |
EN 1012-1-1996 | 壓縮機和真空泵 安全要求 第1部分：壓縮機 | Compressors and vacuum pumps - Safety requirements - Part 1: Compressors |
EN 1012-2-1996 | 壓縮機和真空泵 安全要求 第2部分：真空泵 | Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps |
EN 1028-1-2002 | 消防泵 帶起動器的消防離心泵 第1部分：分類 一般和安全要求 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification; General and safety requirements |
EN 1028-2-2002 | 消防泵 帶起動器的消防離心泵 第2部分：一般和安全要求的驗證 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements |
EN 1076-1997+AC-1997 | 工場環境 測定氣體和蒸氣用的泵吸附管 要求和試驗方法 | Workplace atmospheres - Pumped sorbent tubes for the determination of gases and vapours - Requirements and test methods |
EN 1151-1999 | 泵 旋轉動力泵 家用熱水安裝和供熱安裝用的電效應不超過200W 的循環泵 要求、測試、標志 | Pumps - Rotodynamic pumps - Circulation pumps having an electrical effect not exceeding 200 W for heating installations and domestic hot water installations - Requirements, testing, marking |
EN 12055-1998 | 帶電驅動壓縮機的液體冷卻設備和熱泵 冷卻模式 定義、試驗和要求 | Liquid chilling packages and heat pumps with electrically driven compressors - Cooling mode - Definitions, testing and requirements |
EN 12157-1999 | 渦輪泵 機床冷卻泵組 額定流量和尺寸 | Rotodynamic pumps - Coolant pumps units for machine tools - Nominal flow rate, dimensions |
EN 12162-2001 | 液體泵 安全要求 流體靜壓試驗程序 | Liquid pumps - Safety requirements - Procedure for hydrostatic testing |
EN 12262-1998 | 旋動式泵 技術文件 術語、輸出范圍、設計 | Rotodynamic pumps - Technical documents - Terms, delivery range, layout |
EN 12263-1998 | 制冷系統和加熱泵 限壓安全開關裝置 要求和試驗 | Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests |
EN 12284-2003 | 制冷系統和加熱泵 閥門 要求、試驗和標志 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
EN 12309-1-1999 | 凈熱輸入不超過70kW的燃?xì)馕鼰岷臀鼰崾娇照{(diào)和/或加熱泵裝置 第1部分：安全性 | Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Part 1: Safety |
EN 12309-2-2000 | 凈熱輸入不超過70kW的燃?xì)馕鼰岷臀鼰崾娇照{(diào)和/或加熱泵裝置 第2部分：能量的合理使用 | Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Part 2: Rational use of energy |
EN 1232-1997 | 工作場所空氣 化學試劑的個人抽樣用泵 要求和試驗方法 | Workplace atmospheres - Pumps for personal sampling of chemical agents - Requirements and test methods |
EN 12462-1998 | 生物技術 泵性能標準 | Biotechnology - Performance criteria for pumps |
EN 12483-1999 | 液體泵 帶頻率轉換器的泵設備 保證和兼容性試驗 | Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests |
EN 12514-1-2000 | 燃油咀爐供油系統用的裝置 第1部分：安全要求和試驗 零部件、輸油泵、控制和安全裝置、油罐 | Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks |
EN 12639-2000+AC-2000 | 液體泵和泵送裝置 噪音試驗規程 精度2級和3級 | Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy |
EN 12723-2000 | 液泵 泵和設備的通用術語 定義、參數、字母符號和單位 | Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units |
EN 12919-1999 | 工廠環境 體積流速大于5L/min的化學藥劑采樣泵 要求與試驗方法 | Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods |
EN 13136-2001 | 制冷系統和加熱泵 壓力釋放設備及相關管道 計算方法 | Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation |
EN 13275-2000 | 低溫容器 低溫設備用泵 | Cryogenic vessels - Pumps for cryogenic service |
EN 13313-2001 | 制冷系統和加熱泵 工作人員能力 | Refrigerating systems and heat pumps - Competence of personnel |
EN 13951-2003 | 液泵 安全要求 糧食加工設備 保證使用中的衛生保健設計規程 | Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use |
EN 14275-2003 | 汽車燃料 汽油和柴油燃料質量的評定 從零售泵和商品燃料售貨機取樣 | Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers |
EN 1736-2000 | 制冷系統和熱泵 軟管元件 振動隔離器和伸縮接頭 要求、設計和安裝 | Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation |
EN 1861-1998 | 制冷系統和熱泵 系統流程圖和管道及儀表圖表 平面圖和符號 | Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols |
EN 1947-2002 | 消防軟管 水泵及車輛用半剛性輸送水軟管組裝件 | Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
EN 225-1987 | 霧化油燃燒器 旋轉軸和外部驅動泵 尺寸 | Atomizing oil burners. Pumps with rotating shaft and external drive; Dimensions |
EN 22858-1993 | 端吸離心泵(額定壓強16巴) 標記、性能和尺寸 | End-suction centrifugal pumps (rating 16 bar)-Designation, nominal duty point and dimensions (ISO 2858:1975) |
EN 23661-1993 | 端吸離心泵 底座尺寸和安裝尺寸 | End-suction centrifugal pumps- Baseplate and installation dimensions (ISO 3661:1977) |
EN 255-1-1997 | 帶電驅動壓縮機的空調器、液體制冷設備和熱力泵 加熱方式 第1部分：術語、定義和標識 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 1: Terms, definitions and designations |
EN 255-2-1997 | 帶電驅動壓縮機的空調器、液體制冷設備和熱力泵 加熱方式 第2部分：對空間加熱裝置作標志用測試和要求 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 2: Testing and requirements for marking for space heating units |
EN 255-3-1997 | 帶電驅動壓縮機的空調器、液體制冷設備和熱力泵 加熱方式 第3部分：對衛生間熱水裝置作標志的測試和要求 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 3: Testing and requirements for marking for sanitary hot water units |
EN 255-4-1997 | 帶電驅動壓縮機的空調器、液體制冷設備和熱力泵 加熱方式 第4部分：空間加熱裝置和衛生間熱水裝置的要求 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 4: Requirements for space heating and sanitary hot water units |
EN 378-1-2000 | 制冷系統和熱泵 安全和環境要求 第1部分：基本要求、定義、分類和選擇準則 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria |
EN 378-2-2000 | 制冷系統和熱泵 安全和環境要求 第2部分：設計、結構、測試、標志和文件 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
EN 378-3-2000 | 制冷系統和熱泵 安全和環境要求 第3部分：安裝位置和人身保護 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection |
EN 378-4-2000 | 制冷系統和熱泵 安全和環境要求 第4部分：操作、維護、修理和恢復 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery |
EN 45510-5-4-1998 | 發電站設備采購指南 第5-4部分：.水力渦輪機、水力、液力存儲器泵和渦輪泵 | Guide for procurement of power station equipment - Part 5-4: Hydraulic turbines, storage, pumps and pump-turbines |
EN 45510-6-4-1999 | 發電站設備采購指南 第6-4部分：渦輪機輔助設備 泵 | Guide for procurement of power station equipment - Part 6-4: Turbine auxiliaries - Pumps |
EN 50216-7-2002 | 電源變壓器及電抗器配件 第7部分：變壓器油的電泵 | Power transformer and reactor fittings - Part 7: Electric pumps for transformer oil |
EN 60041-1994 | 測定水輪機、蓄能泵和水泵-水輪機水力性能的現場驗收試驗 | Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines (IEC 60041:1991, modified) |
EN 60193-1999 | 水輪機、蓄能泵和水泵水輪機 模型驗收試驗 | Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests (IEC 60193:1999) |
EN 60335-2-40-2003 | 家用和類似用途電器 安全 第2-40部分：電熱泵、空調器和去濕機的特殊要求 | Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40:2002, modified) / Note: Endorsement notice*To be amended by EN 60335-2-40/prAB (2003-0 |
EN 60335-2-40/prA2-2003 | 家用和類似用途電器的安全 第2-40部分：電動熱泵、空調器和去濕機的特殊要求 修改prA2 | Amendment 2 to IEC 60335-2-40, Ed. 4.0: Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers containing flammable refrigerants |
EN 60335-2-41-2003 | 家用和類似用途電器的安全 第2-41部分：溫度不超過35℃的液體泵的特殊要求 | Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps (IEC 60335-2-41:2002) / Note: Endorsement notice |
EN 60335-2-51-2003 | 家用和類似用途電器的安全 第2-51部分：加熱和供水設施用固定式循環泵的特殊要求 | Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations (IEC 60335-2-51:2002) / Note: Endorsement notice |
EN 60601-2-24-1998 | 醫療電氣設備 第2－24部分：輸液泵和控制器的特殊安全要求 | Medical electrical equipment - Part 2-24: Particular requirements for the safety of infusion pumps and controllers (IEC 60601-2-24:1998) |
EN 60609-2-1999 | 水輪機蓄能泵和水泵水輪機氣蝕損壞的評定 第２部分：水斗式水輪機的評定 | Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines - Part 2: Evaluation in Pelton turbines (IEC 60609-2:1997) |
EN 60994-1992 | 水力機械(水輪機、蓄水泵和水輪泵)振動和脈動的現場測量指南 | Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) (IEC 60994:1991) |
EN 61290-6-1-1998 | 光纖放大器 基本規范 第6-1部分：泵浦泄漏參數的試驗方法 光解復用器 | Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer (IEC 61290-6-1:1998) |
EN 61702-1999 | 直接耦合光伏水泵系統的額定值 | Rating of direct coupled photovoltaic (PV) pumping systems (IEC 61702:1995) |
EN 733-1995 | 帶支承架的額定值為10bar的端吸式離心泵 公稱負荷點、主要尺寸和命名系統 | End-suction centrifugal pumps, rating with 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system |
EN 734-1995 | 側槽泵PN40 公稱負荷點、主要尺寸和命名系統 | Side channel pumps PN 40 - Nominal duty point, main dimensions, designation system |
EN 735-1995 | 旋轉動態泵的總體尺寸 公差 | Overall dimensions of rotodynamic pumps - Tolerances |
EN 752-6-1998 | 室外建筑物的排水系統 第6部分：泵送裝置 | Drain and sewer systems outside buildings - Part 6: Pumping installations |
EN 809-1998+AC-2002 | 液體用泵和泵元件 一般安全要求 | Pumps and pump units for liquids - Common safety requirements |
EN 814-1-1997 | 帶有電驅動壓縮機的熱泵和空調器 制冷模型 第1部分：術語、定義和名稱 | Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 1: Terms, definitions and designations |
EN 814-2-1997 | 帶有電驅動壓縮機的熱泵和空調器 制冷模型 第2部分：測試和標志要求 | Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 2: Testing and requirements for marking |
EN 814-3-1997 | 帶有電驅動壓縮機的熱泵和空調器 制冷模型 第3部分：要求 | Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 3: Requirements |
EN ISO 14847-1999 | 回轉容積泵 技術條件 | Rotary positive displacement pumps - Technical requirements (ISO 14847:1999) |
EN ISO 15083-2003 | 小艇 艙底排水泵送系統 | Small craft - Bilge pumping systems (ISO 15083:2003) |
EN ISO 15136-1-2001 | 石油和天然氣的井下設備 人工升降梯的空腔泵系統 第1部分：泵 | Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2001) |
EN ISO 15783-2003 | 未密封的旋轉動態泵 II級 規范 | Seal-less rotodynamic pumps - Class II - Specification (ISO 15783:2002) |
EN ISO 16017-1-2000 | 室內、周圍和工作場所空氣 用吸附管/熱解吸/毛細管氣相色譜法作揮發性有機化合物的取樣及分析 第1部分： | Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000) |
EN ISO 16330-2003 | 往復式正排量泵和泵送裝置 技術條件 | Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003) |
EN ISO 5198-1998 | 離心泵、混流泵和軸流泵 液壓性能試驗規范 精密級 | Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class (ISO 5198:1987) |
EN ISO 5199-2002 | 離心泵技術條件 Ⅱ類 | Technical specifications for centrifugal pumps - Class II (ISO 5199:2002) |
EN ISO 7886-2-1997 | 一次性使用無菌皮下注射器 第2部分：帶動力驅動注射泵的注射器 | Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:1996) |
EN ISO 8849-2003 | 小艇 電動直流艙底泵 | Small craft - Electrically operated direct-current bilge-pumps (ISO 8849:2003) |
EN ISO 9905-1997 | 離心泵技術條件 I類 | Technical specifications for centrifugal pumps - Class I (ISO 9905:1994) |
EN ISO 9906-1999 | 回轉動力泵 液壓性能驗收試驗 等級1和2 | Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2 (ISO 9906:1999) |
EN ISO 9908-1997 | 離心泵技術條件 III類 | Technical specifications for centrifugal pumps - Class III (ISO 9908:1993) |
ENV 12102-1996 | 帶電驅動壓縮機的空調、熱泵和除濕器 空氣噪音的測量 聲功率級的測定 | Air conditioners, heat pumps and dehumidifiers with electrically driven compressors - Measurement of airborne noise - Determination of the sound power level |
prEN 12178-2003 | 制冷系統和熱泵 液面指示裝置的要求、試驗和標志 | Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking |
prEN 12255-2-1995 | 廢水處理廠 第2部分：生廢水泵送裝置的性能要求 | Wastewater treatment plants - Part 2: Performance requirements of raw wastewater pumping installations |
prEN 12259-12-2000 | 固定消防系統 噴水器和噴水系統構件 第12部分：灑水器泵 | Fixed firefighting systems - Components for sprinkler and water spray systems - Part 12: Sprinkler pumps |
prEN 12693-1996 | 制冷系統和熱泵 安全和環境要求 制冷壓縮機 | Refrigerating systems and heat pumps - Safety and environmental requirements - Refrigerant compressors |
prEN 13386-1998 | 液泵 潛水泵和泵部件 特殊安全要求 | Liquid pumps - Submersible pumps and pump units - Particular safety requirements |
prEN 14276-1-2001 | 熱泵和冷卻系統的壓力設備 容器 一般要求 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels; General requirements |
prEN 14343-2003 | 容積泵 驗收性能試驗 | Rotary positive displacement pumps - Performance tests for acceptance |
prEN 14466-2002 | 消防泵 便攜泵 試驗、性能要求和安全 | Fire fighting pumps - Portable pumps - Safety and performance requirements, tests |
prEN 255-6-1992 | 熱力泵 用于加熱或加熱和制冷的帶電驅動壓縮機熱力泵組 第6部分：用于加熱衛生間熱水的熱力泵組 測試、 | Heat pumps; heat pump units with electrically driven compressors used for heating or for heating and cooling; part 6: heat pump units for heating sanitary water; testing, definitions and requirements for marking |
prEN 255-7-1992 | 熱力泵 帶電驅動壓縮機的熱力泵組 第7部分：用于加熱衛生間熱水的熱力泵組和熱力泵 空中噪音的測量 噪 | Heat pumps; heat pump units with electrically driven compressors; part 7: heat pump units and heat pumps for heating sanitary water; measurements of airborne noise; determination of the sound power level |
prEN 255-8-1992 | 熱力泵 帶電驅動壓縮機的熱力泵組 第8部分：用于加 熱衛生間熱水的熱力泵組和熱力泵 要求 | Heat pumps; heat pump units with electrically driven compressors; part 8: heat pump units and heat pumps for heating sanitary water; requirements |
prEN 50216-10-4-1996 | 電源變壓器及電抗器配件 第10-4部分：冷卻設備 變壓器油的電泵 | Power transformer and reactor fittings - Part 10: Cooling equipment - Section 4: Electric pumpsets for transformer oil |
prEN ISO 14617-9-2002 | 圖表用圖形符號 第9部分：泵、壓縮機和風扇 | Graphical symbols for diagrams - Part 9: Pumps, compressors and fans (ISO/FDIS 14617-9:2002) |
prHD 395.2.24 S1-1992 | 醫用電氣設備 第2部分：輸液泵和控制器安全性的特殊要求 | Medical electrical equipment; part 2: particular requirements for safety of infusion pumps and controllers (IEC 62D(CO)61) |
相關文章標準
進口德國泵生產DIN 標準http://www.www.1001y.net/newsdetail_1983242.html
進口英國泵生產BS標準http://www.www.1001y.net/newsdetail_1981762.html
進口美國泵ANSI標準http://www.www.1001y.net/newsdetail_1981149.html
世界各國閥門標準代號http://www.www.1001y.net/newsdetail_1979672.html
進口,液壓氣動生產標準http://www.www.1001y.net/newsdetail_1983267.html
